Self-adhesive waterproof membrane is widely used because its self-adhesive formulation makes safe,
0.7/0.8/1/1.2/1.5/1.8/2/3/4/5mm SBS APP modified bitumen PE/Aluminum foil/Sand/Mineral surface torch applied roofing felt Root Penetration Resistance self adhesive waterproofing membrane roll for China factory free sample
Self-adhesive waterproof membrane is widely used because its self-adhesive formulation makes safe, easy and fast installation. We can supply the followings, self-adhesive bituminous waterproof membrane, self-adhesive bituminous with reinforcement waterproof membrane, self-adhesive pre-laid waterproof membrane, and self-adhesive wet-laid waterproof membrane.
Thickness: 1mm, 1.2mm, 1.5mm, 2mm, 2.5mm, 3mm, 4mm.
Width: 1m or be cut into smaller width
Length: 10m, 15m, 20m, 25m
❖ Self-Adhesive Bituminous Waterproof Membrane
Its basement is made from SBS elastomer compound, good road bitumen and adhesion-promoting resins, its upper side is faced with PET Film, PE Film, aluminum foil or silicone-coated film, its bottom side is removable silicone-coated film.
Specification for Self-Adhesive Bituminous Waterproof Membrane
|1||Tensile Property||Tension N/50mm||≥150||≥200||≥150||≥200||-|
|5||Impermeability||0.2Mpa, 120 Minutes||-|
|9||Holding Power||≥20 Minutes|
|10||Heat Aging||Tension Retention||≥80%|
Aluminium sheet (N/mm)
|11||Thermal Stability||Appearance||No slipping, flowing or dripping|
❖ Self-Adhesive Bituminous with Reinforcement Waterproof Membrane
Its base material is polyester felt, dipped and coated with adhesive polymer modified bitumen, its upper side is faced with PE Film, fine sand, mineral granular, aluminum foil or silicone-coated film, its bottom side is removable silicone-coated film.
Specification for Self-Adhesive Bituminous with Reinforcement Waterproof Membrane
|1||Soluble Substance g/m2||2.0mm||≥1300||-|
|2||Tensile Property||Tension N/50mm||2.0mm||≥350||-|
|Elongation /Max. Tension||≥30%||40%|
|3||Heat Resistance (70℃)||No slipping, flowing or dripping|
|4||Low Temperature Flexibility||-20℃||-30℃|
|5||Impermeability||0.3Mpa, 120 Minutes|
|6||Peel Strength||Membranes (N/mm)||≥1.0|
|Aluminium sheet (N/mm)||≥1.5|
|7||Nail Water Tightness||Pass|
|8||Oil Permeability (pieces)||≤2|
|9||Holding Power||≥15 Minutes|
|10||Heat Aging||Elongation /Max. Tension||≥30%||≥40%|
|Low Temperature Flexibility||-18℃||-28℃|
|Peel Strength Aluminium sheet (N/mm)||≥1.5|
|11||Self-adhesive Bituminous Peel strength (N/mm)||≥1.5|
❖ Self-Adhesive Pre-Laid Waterproof Membrane
According to different base materials, it is classified to be self-adhesive pre-laid polyester felt waterproof membrane, self-adhesive pre-laid polymer waterproof membrane.
➤ Self-adhesive Pre-laid Polyester Felt Waterproof Membrane
Its base material is bituminous reinforcement waterproof membrane, both sides are covered with self-adhesive layer, and faced with removable silicone-coated film as isolation layer.
Specification for Self-Adhesive Pre-Laid Waterproof Membrane
|1||Soluble Substance g/m2||-||≥2900|
|2||Tensile Property||Tension N/50mm||≥500||≥800|
|5||Static Load||20kg, no leaking|
(70℃, 120 minutes)
No slipping, flowing
0.6Mpa, no channeling
(with Lately Poured Concrete) N/mm
|Surface with cement powder||≥1.5|
|Surface with sands||≥1.5|
|Ultraviolet Radiation Aging||≥1.5|
❖ Self-Adhesive Wet-Laid Waterproof Membrane
Its base material is bituminous reinforcement waterproof membrane, one side or both sides are covered with self-adhesive layer, and faced with removable silicone-coated film as isolation layer.
Specification for Self-Adhesive Wet-Laid Waterproof Membrane
|1||Soluble Substance g/m2||3.0mm||-||≥2100|
|2||Tensile Property||Tension N/50mm||≥150||≥200||≥400||≥600|
|Elongation /Max. Tension||≥30%||≥150%||≥30%||≥40%|
|4||Heat Resistance (70℃, 120 minutes)||No slipping, flowing or dripping|
|5||Low Temperature Flexibility||-15℃||-25℃||-15℃||-25℃|
|6||Impermeability||0.3Mpa, 120 Minutes, no leaking|
1) Don't need fire, don’t need adhesive glue, environment-friendly;
2) Excellent adhesive property.it can make waterproof layer be a whole body;
3) High elongation;
4) Good low temperature felicity property.
1) Widely used in the industrial and civil building roofing, underground, pool, tunnel, wooden and metal roofing.
2) Specially applied in the chemical factory, garment factory, and granary.
3) Especially used in cold places.
4) Tape used for sealing all construction material surfaces.
Packaging & Shipping
1.Packing with strong wood pallet and covering by shrink film in case of slant.
2.Samples are shipped via International Express such as DHL, UPS, Fedex, TNT, etc.
3.Large quantity would be shipped via sea freight to your local seaport.
4.The delivery time is about 10-15 days after receiving the deposit.
Waterproofing self-adhesive bitumen membrane must be protected from damaging (by traffic, back filling, etc.) after finished application, it should be protected by a cementitious screed or protection boards. Where a bond with topping is not required, a separator sheet should be used.
1.Free sample can be provided to test.
2.Powerful construction technical support.
3.Use pallet shipping to ensure safety transportation.
4.Welcome to visit the factory at any time.
5.If you order to us, we must promise the quality, if some quality problem happened.
Fuhua, one of the largest China manufacturers and suppliers, now brings you 0.7/0.8/1/1.2/1.5/1.8/2/3/4/5mm sbs app modified bitumen pe/aluminum foil/sand/mineral surface torch applied roofing felt root penetration resistance self adhesive waterproofing membrane roll for china factory free sample from its professional factory. Please rest assured to buy.
Taitou Industrial Zone, Shouguang City, Shandong Province, China