Hot Sale Sbs Waterproof Membrane for Bridge Basic Info
Model NO.: HRT
Ceiling Tile Shape: Roll
SBS Waterproofing Membrane Surface Treatment: Film Coated
SBS Waterproofing Membrane Usage: Outdoor
Width in Roll: 1 M
Specification: 2- 4 mm
HS Code: 39219090
Type: Waterproof Roll Material
Ceiling Tile Type: Fiberglass Ceilings
SBS Waterproofing Membrane Function: Waterproof
Feature: Low Temperature Application
Length in Roll: 7.5m, 10m, 15m
Transport Package: in Rolls
Hot Sale Sbs Waterproof Membrane for Bridge Product Description
Length/roll: 7.5m/10m/15m or as your need.
Surface: PE film/Granules/Sand...
A) SBS modified bitumen waterproof membrane is specially used as waterproof material in cold area
B) APP is specially suitable for areas of high temperature and of strong sun-shine
SBS/APP Modified Bitumen Waterproof Membrane
C)Good performance in Good impermeability, anti-puncture, anti-broker, anti-resistance, anti-erosion, anti-mildew, anti-weathering
D)Possess good tensile strength, elongation rate and size stability which could be well suited the substrate distortion and crack
Hot Sale Sbs Waterproof Membrane for Bridge Applicable scope:
Suitable for civil building roofing, underground, bridge, parking, pool, tunnel in the line of waterproofing and dampproof, especially for
The building under high temperature. According the roofing engineering stipulation, APP modified bitumen membrane could be used in the
Grade I civil building and industrial building which has special waterproofing requirement
There are two methods in application:
A) One way is by heating and melting method. Heat the polyethylene film of the membrane and roof deck surface by heating and melting
Method to be nearly melted (not flowing), then install the membrane filly bonded to the roof deck with overlaps of 5-10cm.
B) The other way is by cold adhesive method. Pour the cold adhesive homogeneously on the roof deck, then roll the membrane to install it to be fully sticked to roof deck.
By heating and melting method and by cold adhesive can be used in alternation in application as requested.
C)After application, a full serious inspection is required to sure no air bubble, no falling away. Etc. To guarantee the waterproof life.
Requirements for construction:
1. The base should be dry and clean. Do not work in the rainy or snowy day.
2. Do not work under heavy wind(above 5 grade)
3. Unsuitable for construction below 5° C
4. If it is rain or snow in the process of construction, protective measure to the laid membrane is must.
5. All the workers should put on special uniforms to keep safe when installing. There should be equipments for fire controls.